Double Glazing Lock Repairs

Quality locks on your windows and doors can stop burglars from gaining entry into your home. They don't usually like breaking glass or trying to squeeze through windows.

Certain double glazing owners however, have had issues with their window or door lock after the installation. Luckily, these problems are often fixable without having to purchase new double glazing.

Broken or damaged locks

A locksmith can fix your uPVC window or door lock if damaged or is not working properly. They can fix the striker plates, hinges and locks on your double-glazed. They can also adjust the cylinder's position to correct any misalignment issues that may be causing your handle to not work properly.

If the key fits into the lock, but it doesn't turn or is difficult to insert the mechanism might be seized up. This could be due to dirt or grime accumulating in the mechanism. If this is the case, it may be possible to clean the lock and lubricate it. It is crucial to make use of a dry lubricant such as teflon or graphite instead of oil which can attract dirt and adhere to the inside of the mechanism. After lubricating the lock you must insert the key and attempt to turn it. The lubricant should get into the mechanism and the lock should turn smoothly.

Loose screws within the lock mechanism can be another reason for a malfunctioning lock. They can loosen and fall out or even break off completely preventing the lock to function properly. A screwdriver can be used to tighten these screws, however, caution must be taken not to tighten them too much, because this could cause damage to the internal components.

A faulty lock is dangerous for your family and you. This is particularly the case if you have children. It can be easy for them to unlock the door without knowing and thus give them access to your home. If you're worried about the possibility that this might occur, a professional locksmith can help re-secure the double glazing doors.

Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on both uPVC doors and windows. We can also reconfigure your uPVC or double glazing locking system to meet your specific requirements, meaning that in most cases, replacement doors and windows are not necessary.

Handles that are damaged or broken

A lot of double-glazed windows come with a multi-point lock as part of the overall security package. This is a great option for those who are concerned about potential thieves who may try to gain access to your home. Ask your locksmith for antilift locks. They can be put in as an addition to the existing locks and will ensure that your windows are securely shut.

It's not uncommon for handle locks to become damaged or fail. They are the first part of your window that will be forced open by criminals who want to break in. Fortunately, the good news is that this is one of the most simple parts to repair.

Modern uPVC handles and aluminium handles come with the multi-point locking mechanism referred to as Espagnolette which is designed to resist forced entry. This security upgrade is usually provided as an additional option on new uPVC window installations. Older uPVC and aluminium handles can be upgraded to shoot bolt locking systems and again as an additional option on double-glazed window installations.

If a handle is defective, it is essential to get the handle repaired as quickly as possible. Faulty handles may prevent the window from closing properly and allow drafts to get in. It could also be a weakness that opportunistic thieves could exploit and put the belongings of your family and your personal belongings at risk.

The process of repairing the malfunctioning mechanism begins by getting access to the window frame and removing the broken handle. The gearbox is then accessed to determine the kind of gearbox used to open the handle. This will allow to replace the handle that matches the profile and internal window frame mechanisms.

Once the mechanism has been replaced the handle can be re-affixed using the original screws - however, we usually recommend replacing them with larger ones as this will give an even more secure fit. The final step is to apply a layer of clear sealant to protect the handle from further rust. After that the window will be operational again and at less than the cost of replacing the entire window.

Hinges that are Broken or damaged

If your windows do not close correctly, draughts may get in, your home's security barriers will weaken and you run the risk of water damage or damp. Broken or damaged window hinges are a frequent issue and can be repaired easily.

If your uPVC windows don't open or shut and close, it's likely the hinges need to be replaced or repaired. While many window companies require you to purchase a new window to solve this issue We're able to repair the hinges that are damaged and save you money.

Window hinges are often damaged through repeated use, or weakening over time due to corrosion. If you find a damaged hinge, it's important to take measures to prevent further damage by being careful not to force the window open or closed.

You can find the right parts for your hinge by identifying the type of hinge it is. Common types of window hinges include Maco, Mila, Roto and other brands. It is recommended to consult an expert in this regard so that you don't make the mistake of buying parts that aren't compatible with your current hardware and cause further damage.

The hinges that are not working properly can cause major issue for your uPVC window and doors. They can be a significant source of noise, and Jerealas.Top they can also allow for water infiltration that can cause damage to your windows.

Verify that the pin barrels on both sides of the hinge are aligned. If not then tap the head pin with a hammer to make a small bend in the barrel of the hinge. This will hold the pin in position. Then, ask a helper to hold the door as you take the hinges and hinge screws from both the doorjamb as well as the door. Replace the hinges and then install screws using glue. When the glue is drying, secure the hinges by using weights or jerealas (https://www.jerealas.top/cb9tgw-r1ft-727min-2pkk6z-xc4-2134) clamps.

Once your hinges are repaired and repaired, you should be able to re-install the door and jerealas.Top re-attach the handle. It is recommended to replace the screws with the same length of dowels as the original screw, so that they are in line with each the other.

Broken or faulty glass

While uPVC windows do an excellent job of keeping cold out and Jerealas.Top heat in, they are susceptible to becoming damaged over time. This can be the case with damaged or broken glass and defective locks. If not taken care of, it can be a costly problem. It also can detract from the aesthetics of your house and could lead to a loss of insulation, so it's crucial to repair any damage as soon as you can.

You can repair the crack in your glass by yourself if you have the appropriate tools and techniques. First, make sure that the surrounding area surrounding the glass is clean so that any shards won't harm anyone and aren't an accident-prone area. Then, you must remove any broken pieces and dispose of them properly. Then, place masking tape to the entire area to stop shards from scattering and sticking to your skin when you move them. If you're dealing with a double-pane window it's a good idea to pre-fit the pane of glass before gluing it back in place so that you know you'll have enough room to complete the project.

Before applying the glue clean the entire surface of the broken frame and glass with a a dry, clean cloth. Follow the curing and application instructions, which may vary from product-to-product. You may need to clamp the broken glass with lightweight clamps designed to hold fragile materials, based on the angle.

When the adhesive has completely cured, carefully reinstall the glass in the window frame, ensuring that it is flush with the edge of the frame and there aren't any gaps between the glass and the window sash. Avoid flexing the glass as you reinstall it because this could weaken the seal. This could lead to water infiltration or condensation.

If you have a glass window that's completely shattered or has larger cracks, consult a professional glazier like O'Brien(r) to organise an exchange. It's crucial to act fast when you notice broken glass.